Identifier
Status
Replacing the solid-state drive (full-length)
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Adhere the thermal pad to the solid-state drive.
2
Slide the solid-state drive assembly at an angle into the solid-state drive slot.
3
Press the other end of the solid-state drive down and replace the screw (M2x3) that secures the solid-state drive to the system
board.
Identifier
Status
Post-requisites
1
Replace the
battery (half-length)
2
Replace the
base
cover.
36
Replacing the solid-state drive (full-length)
GUID-47BC7D1D-16F9-431C-B5A1-81A1759FBE6A
Released
computer. After working inside your computer, follow the instructions in
GUID-2E45853F-15D0-4E23-99A9-F91D4DCDF447
Released
GUID-D6D9C7FD-F5F2-4841-BED9-C4F8672A8F1D
Released
or the
battery
(full-length).
16
After working inside
www.dell.com/