Charge The Handset Battery; Set Language Mode; Check For Dial Tone; Set The Dial Mode - VTech Ia5854 User Manual

Installation

Charge the Handset Battery

Place the handset in the base or charger . NEEDS CHARGING will appear on the handset . Charge
• If the phone will
the battery for at least 16 hours the first time.
not be used for a
long period of time,

Set Language Mode

remove the battery
• Press PROG, then press ▲ or ▼ until LANGUAGE is displayed . Press SELECT.
to prevent possible
leakage .
• The current setting blinks . Press ▲ or ▼ until the screen displays the correct language (English,
• If you have any
trouble installing
• Press SELECT to save your selection .
y o u r p h o n e ,
please refer to the

Check for Dial Tone

Troubleshooting
After the batteries are charged, pick up the handset and press PHONE; you should hear a dial tone .
s e c t i o n n e a r
the end of this If you do not, refer to the TROUBLESHOOTING section in the back of this user's manual .
manual .

Set the Dial Mode

If you have touch tone service, the phone is ready to use as soon as the battery is charged . If you
have pulse (rotary) service, you'll need to change the dial mode .
• Press PROG.
• Press ▲ or ▼ or until the screen displays DIAL MODE: and the current setting .
• Press SELECT. The current setting blinks .
• Press ▲ or ▼ to select TONE or PULSE.
• Press SELECT to save .
GETTING STARTED
8
Spanish or French) .
www.vtechphones.com