Setting Up Your Answering System; Feature Summary - VTech Ia5854 User Manual

Answering System Operation At the Base

Setting Up Your Answering System

You can set up one feature at a time, or you can set up the first feature and then move on to set up
• To advance the
the other features in sequence .
r e m o t e a c c e s s
 . Make sure the answering system is on .
code number by
increments of ten,
2 . Press MENU until the system announces the feature you want to set . Refer to the Feature Summary
press and hold the
below for a description of the features and your choices .
CHANGE key .
3 . Press CHANGE until the system announces the desired setting .
4 . Press TIME/SET to confirm your selection.
5 . Press MENU to move on to the next feature, or press PLAY/STOP to exit feature setup .

Feature Summary

Default settings indicated by * .
System
"Remote access code. To change the setting press
CHANGE."
9*
"Message alert. To change the setting press CHANGE."
Off*
On
"Announcement only, record no messages. To
change the setting press CHANGE."
On
Off*
BASIC OPERATION
28
Announces:
www.vtechphones.com
Description/Directions:
Set the remote access code you will use to
access features and functions of the answering
system from a touch tone phone . You can
select any two digit code, from 0 to 99 .
When message alert is turned on, the base
beeps once every 0 seconds when new
messages have been received .
When you turn announce only on, callers
hear your announcement, but cannot leave
a message .