Headset Jack; Operating Range - VTech Ia5854 User Manual

Telephone Operation

Headset Jack

You can use this telephone handsfree
when you install any VTech 2 .5 mm
• T o p u r c h a s e a
headset, visit us headset, purchased separately .
on the web at www .
Plug the headset into the jack located
vtechphones .com
on the right side of the handset (under
or call VTech Cus-
tomer Service at
the small rubber flap). Do not force the
-800-595-95 .
connection, but make sure the plug fits
In Canada, contact
securely .
VTech Telecommu-
nications Canada
Ltd . at www .vtech-
canada .com or -
800-267-7377 .
BASIC OPERATION
4

Operating Range

This cordless telephone operates within the maximum
power allowed by the Federal
Communications Commission (FCC) . Even so, this
handset and base can communicate over only a
certain distance - which can vary with the locations
of the base and handset, the weather, and the
construction of your home or office. If you receive a
call while you are out of range, the handset might not
ring or if it does ring, the call might not connect when
you press PHONE. Move closer to the base, then
press PHONE to answer the call .
If you move out of range during a phone conversation,
you might hear noise or interference . To improve
reception, move closer to the base .
If you move out of range without pressing OFF, your
phone will be left off the hook . To hang up properly,
walk back into range, periodically pressing OFF.
www.vtechphones.com