Charge The Handset Battery; Set Language Mode; Check For Dial Tone; Set The Dial Mode - VTech 80-5735-00 - V-Tech VT5823 5.8GHz Cordless Phone User Manual

Installation
Charge
• If the phone will
not be used for a
long period of time,

Set Language Mode

remove the battery
to prevent possible
leakage.
• If you have any
trouble installing
y o u r p h o n e ,

Check for Dial Tone

please refer to the
Troubleshooting
s e c t i o n n e a r
the end of this
manual.

Set the Dial Mode

Set Handset Date and Time

8 GETTING STARTED
the Hand
set Battery
Place the handset in the base or charger. NEEDS CHARGING will appear on the handset. Charge
the battery for at least 16 hours the first time.
• Press PROG, then press ▲ or ▼ until LANGUAGE is displayed. Press SELECT.
• The current setting blinks. Press ▲ or ▼ until the screen displays the correct language (English,
Spanish or French).
• Press SELECT to save your selection.
After the batteries are charged, pick up the handset and press PHONE; you should hear a dial tone.
If you do not, refer to the TROUBLESHOOTING section in the back of this user's manual.
If you have touch tone service, the phone is ready to use as soon as the battery is charged. If you
have pulse (rotary) service, you'll need to change the dial mode.
• Press PROG.
• Press ▲ or ▼ until the screen displays DIAL MODE: and the current setting.
• Press SELECT. The current setting blinks.
• Press ▲ or ▼ to select TONE or PULSE.
• Press SELECT to save.
If you subscribe to caller ID service, the date and time will be set automatically with the first
incoming call. If you do not have caller ID service, you can set the date and time manually:
• Press PROG, then press ▲ or ▼ until DATE/TIME is displayed. Press SELECT.
www.vtechphones.com