Setting Up Your Answering System; Feature Summary - VTech Cordless Telephone Manual

Answering System Operation

Setting Up Your Answering System

You can set up one feature at a time, or you can set up a feature and then move
on to set up another feature.
1. Make sure the answering system is on.
Press MENU until the system announces the feature you want to set. Refer
2.
to the "Feature Summary" below for a description of the features and your choices.
Press SELECT until the system announces the desired setting.
3.
Press TIME/SET to confirm your selection.
4.
Press MENU to move on to the next feature, or press a MAILBOX
5.
button to exit Feature Setup.

Feature Summary

Default settings indicated by * .
System announces: Description/directions:
System announces:
"Set Security Code"
50
*
"Set Audible Message Alert " When Message Alert is turned on, the base beeps
Off *
On
"Set Announce Only"
Off *
On
"Set Base Ringer"
On *
Off
"Set Number of Rings"
2
4 *
6
Toll Saver
NOTE: You can exit Feature Setup at any time by pressing a MAILBOX button.
At The Base
Description/directions:
SELECT
Use to choose the remote access code
you will use to access features and functions of the
answering system from a touch tone phone. You can
select any 2-digit code, from 40 to 99.
Note: To advance the remote access code by
10, press and hold SELECT.
once every 10 seconds when new messages
have been received.
When you turn Announce Only On, callers hear
your announcement, but cannot leave a message
Turn the base ringer on or off.
Choose how many times the phone will ring
before the system answers a call.
With Toll Saver active, the system answers after two
rings when you have new messages and after
four rings when you have no new messages.
24