10 Firmware Update
10.1 Update System Firmware
A firmware update may be necessary for compatibility
with other hardware, which is performed through the web
browser. Follow the firmware update instructions to update
the unit as required for this installation.
10.2 Firmware Update
If a firmware update of the CU 5905 Central Unit is
needed, it is done through the browser interface:
Type the 'IP address' or 'Host Name' followed by '/cgi-bin/
update.cgi' in the browser as shown in the next picture.
The CU 5905 Update window is displayed:
Figure 28. Browsing for Update File
The update file is located on the PC using the 'Browse'
button. The update file has the format 'cu_5905_xxxxxx.
dis'. If an update is available, the update file is delivered
from your support source.
After selecting the update file, click the 'Go' button and the
update process begins:
Figure 29. Update File is Uploaded
The update process may take several minutes. During the
update process information is displayed. When the process
is finished the word 'Success' is displayed:
Figure 30. Update is Finalized