Running A Discussion; Language Translation - Shure DDS 5900 User Manual

Digital discussion system

Hide thumbs Also See for DDS 5900:

Table of Contents

8 Running a Discussion

The DDS5900 system supports two channels of language translation. Interpreters use the portable DC 5980 P to monitor

the discussion and send translations to the rest of the participants.

1. Begin by programming the portable DC 5980 P as an interpreter station.

a) Power on the unit by properly connecting it to the DCS-LAN chain.

b) Press and hold the '-' and '+' volume buttons. The Speak light flashes to indicate the unit is ready for programming.

c) While continuing to press the volume buttons, press the channel button. Interpreter mode is set when both channel LEDS are illuminated.

2. Select one of the two channels for audio transmission. The channel LED will illuminate to indicate the selected

channel.

3. Program another DC 5980 P for the second language and select the other channel for transmission.

4. Select the language channel for each user, according to the spoken language.

Flushmount DC 5900 F units are not programmable as interpreter units.

Table of Contents