Bandwidth Control - TP-Link TL-MR3420 User Manual

3g/4g wireless n router
Hide thumbs Also See for TL-MR3420:
Table of Contents

Advertisement

Chapter 4
Destination Network
to which the static route is assigned.
Subnet Mask
- The Subnet Mask determines which portion of an IP address is the
network portion, and which portion is the host portion.
Gateway
- This is the IP address of the gateway device that allows for contact between
the Router and the network or host.
Interface
- This interface tells you whether the Destination IP Address is on the LAN &
WLAN (internal wired and wireless networks), or the WAN(Internet).
Click
Refresh
to refresh the data displayed.

4. 10. Bandwidth Control

4. 10. 1. Control Settings
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Advanced
>
The values you configure for the Egress Bandwidth and Ingress Bandwidth should be
less than 100,000Kbps. For optimal control of the bandwidth, please select the right
Line Type and consult your ISP for the total egress and ingress bandwidth.
- The Destination Network is the address of the network or host
Bandwidth Control
>
Control
Settings.
Configure the Router
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents