TP-Link TL-MR3420 User Manual page 50

Chapter 4
• Default Gateway (Optional)
the router. The default value is 192.168.0.1.
• Default Domain (Optional)
• Primary DNS (Optional)
• Secondary DNS (Optional)
provides two DNS servers.
Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as
automatically.
4. 4. 2. DHCP Client List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
connected to the router.
• Client Name - The name of the DHCP client.
• MAC Address - The MAC address of the DHCP client.
• Assigned IP - The IP address that the router has allocated to the DHCP client.
• Lease Time - The time of the DHCP client leased. After the dynamic IP address has
expired, the dynamic IP address will be automatically renewed.
You cannot change any value on this page. To update this page and show the current
connected devices, click Refresh.
4. 4. 3. Address Reservation
You can reserve an IP address for a specific client. When you have specified a reserved
IP address for a PC on the LAN, this PC will always receive the same IP address each
time it accesses the DHCP server.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
- It is suggested to input the IP address of the LAN port of
- Input the domain name of your network.
- Input the DNS IP address provided by your ISP.
- Input the IP address of another DNS server if your ISP
DHCP > DHCP Client List
DHCP > Address Reservation.
Configure the Router
to view the information of the clients
Obtain an IP Address
49