Chapter 3
Note:
• If you are using 3G/4G Preferred or WAN Preferred, the router would connect, disconnect or switch the
current access automatically. The Connect/Disconnect button (on 3G/4G, PPPoE, PPTP, L2TP) and some
related parameters could not be set manually.
• Only when the WAN connection is Dynamic IP, Static IP or PPPoE can the router support the switch
between 3G/4G mode and WAN mode.
3. Configure the 3G/4G Settings or WAN Connection Type according to the page(s)
shown below.
• 3G/4G Settings
Enter the parameters of your mobile data provider and click Next.
• WAN Connection Type
1 ) Select
WAN Connection Type
Note:
•
If you use cable TV or fiber cable, choose
•
If you are provided with more information such as IP address, Subnet Mask and Default Gateway, choose
IP.
•
If you use DSL line and you are only provided with an account name and a password by your ISP, choose PPPoE.
•
If you are not sure of your
Set Up Internet Connection via Quick Setup Wizard
and click Next.
Dynamic
IP.
WAN Connection
Type, click
Auto Detect
and click Next.
Static
15