TP-Link TL-MR3420 User Manual page 69

Chapter 4
• Enable Bandwidth Control
can take effect.
• Line Type - Select the right type for you network connection. If you are not sure,
please consult your ISP.
• Egress Bandwidth - The upload speed through the WAN port.
• Ingress Bandwidth
4. 10. 2. Rules List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
the Bandwidth Control rules.
• Description - This is the information about the rules such as address range.
• Egress Bandwidth - This field displays the max and min upload bandwidth through the
WAN port. The default is 0.
• Ingress Bandwidth
the WAN port. The default is 0.
• Enable - This field displays the status of the rule.
• Modify - Click Modify/Delete
¾ To add a Bandwidth control rule:
1. Click Add New.
2. Enter the information like the figure shown below.
- Check this box so that the Bandwidth Control settings
- The download speed through the WAN port.
Bandwidth Control >
- This field displays the max and min download bandwidth through
to edit/delete the rule.
Rules List, and you can view and configure
Configure the Router
68