TP-Link TL-MR3420 User Manual page 38

Chapter 4
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
managing the router. If the MAC address is required, you can click
and this MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect
until the connection is re-established.
4. 2. 5. LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
3. Configure the IP parameters of the LAN and click Save.
• MAC Address - The physical address of the LAN ports. The value can not be changed.
• IP Address - Enter the IP address in dotted-decimal notation of your router (factory
default - 192.168.0.1).
• Subnet Mask - An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
• IGMP Proxy - The Internet Group Management Protocol (IGMP) feature allow you to
watch TV on IPTV-supported devices in the LAN .
Note:
• If you have changed the IP address, you must use the new IP address to login.
• If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP
Server will be configured automatically, but the Virtual Server and DMZ Host will not take effect until they
are re-configured.
Restore Factory MAC
- This field displays the MAC address of the PC that is
Network > LAN.
to restore the MAC address of WAN
WAN MAC Address field.
Configure the Router
Clone MAC Address
37