Chapter 4
•
Connect/Disconnect
•
Dynamic IP/ Static IP
please enter the IP address, subnet mask, gateway and DNS also provided by your
ISP.
•
Internet IP Address/ Internet DNS
assigned by PPTP server.
•
Connection Mode
•
Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the Internet again. If you want to keep
your Internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
•
Connect Automatically
when it is down.
•
Connect Manually
immediately. This mode also supports the
on Demand
mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the Internet continually in the background.
4. 2. 4.
MAC Clone
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Advanced
>
3. Configure the WAN MAC address and click Save.
•
WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
- Click this button to connect or disconnect immediately.
- Select either as required by your ISP. If
- The Internet IP address and DNS server address
- In this mode, the Internet connection can be terminated
- The connection can be re-established automatically
- You can click
Network
>
MAC
Clone.
- This field displays the current MAC address of the WAN port.
Connect/Disconnect
Max Idle Time
Configure the Router
Static IP
is selected,
Max Idle Time
to connect/disconnect
function as
Connect
Max Idle Time
because some
36