Error Messages On The Lcd Display - Panasonic KX-FT33NZ Operating Instructions Manual

Error Messages
Error messages on the LCD display —^
If the unit detects a problem, one or more of the following messages will appear on the display.
Display message Cause & Remedy
• There is something wrong with the unit. Contact your service personnel.
• The cover is open. Close it.
• The document is not fed into the unit properly. Reinsert the document and try
again. If misfeeding occurs frequently, clean the document feeder rollers (p. 56).
If the problem remains, adjust the feeder pressure (p. 55).
• Attempted to transmit a document longer than 600 mm (235/8u). Press the
1 S TOP) button to remove the document. Divide the document into two or more
sheets and try again.
• Memory (telephone numbers, parameters, etc.) has been erased. Re-program.
• The other party's machine is busy or ran out of recording paper. Try again.
out of paper
|
j
• The unit ran out of recording paper. Install a recording paper roll (p. 17).
• The recording paper is jammed. Clear the jammed paper (p. 54).
• The other party's machine does not have a polling feature. Check with the other
party.
redial time out
| | • The other party's machine is busy or ran out of recording paper. Try again.
remove document j
| • The document is jammed. Remove the jammed document (p. 55).
• A transmission error occurred. Try again.
UNIT OVERHEATED
• The unit is too hot. Let the unit cool down.