Panasonic KX-FT33NZ Operating Instructions Manual page 30

Sending Faxes
Sending faxes manually
1
Open the document feeder tray.
2
Adjust the width of the document guides to the size
of the document.
4
Press I RESOLUTION repeatedly to select the
desired setting, if necessary (see the bottom of this
page).
5
6
Press MONITOR
1
or lift the handset.
Dial the fax number.
Example:
7
When a fax tone is heard, press
START/CQPY/SET i . and hang up the handset if
using it.
Note:
• If the other party answers your call, ask them to start
receiving a fax, then press your
I
START/CQPY/SET i.
To feed 11 or more sheets at a time
Insert the first 10 sheets of the document. Add the extra
sheets (up to 10) before the last sheet is fed into the unit.
Document
feeder tray Document guide(s)
To redial the last number
Press "REDIAL/PAUSE .
• If the line is busy, the unit will automatically
redial the number up to 2 times.
• While waiting for redial, the following will be
displayed.
To stop transmission
Press STOP •
To eject the document, press ; STOP again.
Selecting the resolution
Select the desired resolution according to the type of document.
For printed or typewritten originals with normal-sized characters.
For originals with small printing.
For originals with minute printing.
For originals containing photographs, shaded drawings, etc.
• Using the fine, super fine or half tone setting will increase the transmission time.
• If the resolution setting is changed during feeding, it will be effective from the next sheet.
• The super fine resolution only works with other compatible machines.
31