Operations; When A Function Does Not Work, Check Here Before Requesting Help - Panasonic KX-FT33NZ Operating Instructions Manual

Operations
When a function does not work, check here
before requesting help
General
Problem
Cause & Remedy
1 cannot make and receive calls.
• The power cord or telephone line cord is not connected. Check the
connections (p. 18).
1 cannot make calls.
• The dialing mode setting is wrong. Change to TONE or PULSE
(p. 18).
The unit does not work.
• Disconnect the unit from the telephone line and connect the line to
a known working telephone. If the working telephone operates
properly, contact your service personnel to have the unit repaired.
If the working telephone does not operate properly, contact your
telephone company.
The unit does not ring.
• The ringer volume is set to off. Adjust to a suitable level (p. 23).
The (REDIAL/PAUSE button does
not function properly.
• If this button is pressed during dialing, a pause will be inserted. If
pressed immediately after a dial tone is obtained, the last number
dialed will be redialed.
The receive mode does not function
• A ring pattern detection is set (p. 45).
as explained on pages 38 and 39.
Fax transmission
Problem
Cause & Remedy
The other party complains that
letters on their received document
are distorted.
• If your line has special telephone services such as cal! waiting, the
service may have been activated during fax transmission. Connect
the unit to a line that does not have these services.
• The extension telephone on the same line is off the hook. Hang up
the extension telephone and try again.
The other party complains that dirty
patterns or black lines appear on
their received documents.
• The glass or rollers are dirty. Clean them (p. 56).
1 cannot make an international fax
call.
• Use the overseas transmission mode (p. 37).
• Add two pauses at the end of the telephone number (p. 25).
52