Table of Contents
Advertisement
Error Messages
Error messages on the LCD display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display message
CALL SERVICE
CHECK COVER
CHECK DOCUMENT
CHECK MEMORY
NO RESPONSE
OUT OF PAPER
PAPER JAMMED
POLLING ERROR
REDIAL TIME OUT
REMOVE DOCUMENT
TRANSMIT ERROR
UNIT OVERHEATED
– 58 –
There is something wrong with the unit. Contact your service personnel.
The cover is open. Close it.
The document is not fed into the unit properly. Reinsert the document and try
again. If misfeeding occurs frequently, clean the document feeder rollers (p. 64).
If the problem remains, adjust the feeder pressure (p. 63).
Attempted to transmit a document longer than 600 mm (23
button to remove the document. Divide the document into two or more
STOP
sheets and try again.
Memory (telephone numbers, parameters, etc.) has been erased. Re-program.
The other party's machine is busy or ran out of recording paper. Try again.
The unit ran out of recording paper. Install a recording paper roll (p. 17).
The recording paper is jammed. Clear the jammed paper (p. 62).
The other party's machine does not have a polling feature. Check with the other
party.
The other party's machine is busy or ran out of recording paper. Try again.
The document is jammed. Remove the jammed document (p. 63).
A transmission error occurred. Try again.
The unit is too hot. Let the unit cool down.
Cause & Remedy
5
/
"). Press the
8
Advertisement
Table of Contents
