Button Lock; Taking Laps; Changing Workout Metrics During A Workout - Timex IRONMAN R300 User Manual

Button Lock

Button lock prevents accidental touchscreen or button presses during a workout. This can be
very helpful in preventing accidental pausing, etc. of a workout due to wrist flexing or wet
clothes interacting with the touchscreen.
During any workout, press and hold the Back Button for 2 seconds. An alert appears instructing
you to continue holding. After 5 seconds, button lock will activate and, a small lock icon will
appear on the workout display. To Turn off button lock, do the same sequence; Press and hold
back button for 2 seconds to activate the feature; an alert appears instructing you to continue
holding, and after 5 seconds, button lock will be turned off and normal workout mode is
displayed.

Taking Laps

Press the up button during a workout to record a manual lap. If autolap is on the next autolap
will begin from this time. When a manual or automatic lap is taken, the lap summary screen will
display for three seconds.
Note that the current lap is shown at the top right of the workout display screen above the
Lap icon.

Changing Workout Metrics During a workout

Pressing the down pusher will cycle the bottom field on the workout page between all of the
metrics available in that sport mode. If autoscroll is on in workout settings then the metrics will
automatically cycle every 3 seconds.
. . .
15