Ip Field Descriptions - Avaya CU360 Installing And Administering

If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
CU360 displays the Advanced window.
3. Click Calls > Preferences > IP.
4. Configure the following fields:
• SIP DTMF
• H.323 DTMF RFC2833
• H.323 DTMF H.245 UII
• Use H.323 Generic Vendor Code
• Dialing Number Format Mode
• Separator
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings

IP field descriptions

Name
SIP DTMF
H.323 DTMF RFC2833
H.323 DTMF H.245 UII
Use H.323 Generic Vendor
Code
Dialing Number Format
Mode
Separator
July 2020
on page 40
Description
The option to send DTMF audio tones in the RTP stream for SIP calls.
This is the default option.
The option to send DTMF audio tones in the RTP stream for H.323–
based calls.
The option to enable or disable the out-of-band DTMF transmissions in
H.323–based calls.
The option to enable the H.323 application uses a generic vendor code
identity instead of its default vendor code. So, the remote H.323 devices
do not recognize it as an Avaya endpoint.
The dial number format of the H.323 or SIP gatekeeper.
You can use any of the following valid formats:
<gatekeeper number><separator><extension of the called
•
endpoint>
<extension><separator><number>
•
The option is used when dialing to the gatekeeper. The default separator
is the pound sign (##).
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
IP field descriptions
81