New Fqdn Field Descriptions - Avaya CU360 Installing And Administering

Initial administration
Procedure
1. Do one of the following:
• From the endpoint, click Configure > Advanced > Calendar.
• From the web interface, click Administrator Settings > Calendar > General.
2. Click New FQDN.
3. Configure the following settings:
• Meeting FQDN
• Dialing FQDN
• Prefix
• Call Protocol
4. On the web interface, click Save.

New FQDN field descriptions

Name
Meeting FQDN
Dialing FQDN
Prefix
Call Protocol
July 2020
Description
The FQDN in the meeting location.
The meeting location is the virtual room associated with Avaya CU360.
The meeting location is in the https://<Meeting FQDN>/portal/
tenants/default/?ID=<MeetingID> format.
The FQDN of the SIP or H.323 server deployed in your Avaya Equinox
Solution deployment
• If the Avaya CU360 is registered to a SIP or H.323 server that can
establish calls by adding a prefix to the virtual room number, leave this
field blank.
• If the Avaya CU360is located outside the enterprise network and not
registered to a SIP or H.323 server, enter the domain address specified
after the at (@) symbol in the meeting invitation.
The prefix to the virtual room number of Avaya CU360registered to a SIP
or H.323 server that can establish calls by adding a prefix.
The call protocol that Avaya CU360 uses.
The options are:
• SIP
• H.323
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
®
56