Monitors General Field Descriptions; Configuring The Avaya Cu360 Video Layouts - Avaya CU360 Installing And Administering

Advance administration

Monitors General field descriptions

Name
Number of Monitors
Resolution HD1
CEC – Select as Source on
Incoming Calls for endpoint
only

Configuring the Avaya CU360 video layouts

About this task
After you connect the monitor to the HDMI port on Avaya CU360, you can configure the video
layouts.
This configuration is available only if your administrator enabled the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
CU360 displays the Advanced window.
3. Click I/O Connections > Monitors > PIP-PaP-PoP.
4. Configure the following fields:
• MultiImage Mode
July 2020
Description
The option to display available monitors that are connected to Avaya
CU360.
Activate the HDMI port on Avaya CU360 which connects to a monitor
through the HD1 port.
The options are:
• <auto>: Avaya CU360 automatically detects the connected monitor.
• HD1: Avaya CU360accepts input only from the monitor connected
through the HD1 port.
The option to define the resolution of the connected monitor through the
HD1 port.
The option to use a video source for the monitor which is different from
the Avaya CU360 connected monitor.
For an incoming call, if you select the option to Yes, the monitor is
automatically switched to Avaya CU360 video source.
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
92