Configuring The Bacnet Explorer; Configuration Page; 5.1.1 Network Settings; Figure 11: Network Settings Page - SMC Networks FieldServer BACnet Explorer Startup Manual

BACnet Explorer Start-up Guide
5

CONFIGURING THE BACNET EXPLORER

5.1

Configuration Page

By default the BACnet Explorer will open up on the BACnet Explorer page. Navigate to the Configuration
page by clicking on the Configuration button.
NOTE: Each page has a corresponding button in the column down the left side of every page.

5.1.1 Network Settings

The IP settings for the BACnet Explorer are used by both BACnet connections. The IP settings can be
edited in the Network Settings section as shown.

Figure 11: Network Settings Page

Page 12 of 24