Comdial R DSU User Manual page 38

Programming Your Telephone
•
To receive a message at an alerted station,
1. Observe flashing HOLD or MESSAGE light.
2. Press INTERCOM, then HOLD; or MESSAGE (connection to
station that left message is automatic).
•
To turn on the message waiting light at another station,
1. Press INTERCOM
2. Dial extension number of station to be alerted (the message
waiting light of called station will flash).
•
To turn off the message waiting light at another station,
1. Press INTERCOM # 3, or MESSAGE.
2. Dial extension number of station that was alerted (the message
waiting light of called station will turn off).
•
To turn off the message waiting light during message-delivering
conversation,
1. Press INTERCOM.
NOTE: Any station, if programmed with "Message Wait Originate,"
can have this messaging capability.
8 – 2 Non-LCD Station User's Guide
3, or MESSAGE.
GCA70–248