Making Calls - Comdial R DSU User Manual

GCA70–248
3
3.1

Making Calls

NOTE: If the installer has enabled your system with Specialized Route
Access (SRA), the system returns a special intercom tone when
you dial out (using INTERCOM 9, or a preprogrammed line
group button). After this SRA tone, you have ten seconds to
dial digits; otherwise, the telephone automatically returns to its
idle state. Furthermore, you only have three seconds pause
time between digits before the system automatically dials your
call.
•
To make a call,
1. Lift handset, select line (unless your telephone selects it for you),
or select intercom, and listen for dial tone,
2. Either dial number or press HOLD and then press autodial, use
speed dial feature, use redial feature, or press Direct Station Select
(DSS) if making an intercom call.
•
To dial autodial number,
1. Press preprogrammed button. If button is programmed at the
second level of a DSS button, press SHIFT before pressing
autodial button.
2. When called party answers, lift handset.
•
To dial personal or system speed dial number,
NOTE: If you manually choose a line for dialing, press HOLD before
using a speed dial. If you place a call on hold prior to using
your speed dial, pause several seconds before you press the
speed dial button; if you immediately press the speed dial
button, the system will choose the line that you have on hold to
place your speed dial call.
1. Dial desired code:
1–0 = personal speed dial number,
01 – 99 = system speed dial number,
Making Calls
Non-LCD Station User's Guide 3 – 1
Making Calls