Table of Contents
Advertisement
Introducing The Telephone
1.3 Using Your Speakerphone
On the speakerphone-equipped models (8124S-**, 8112S-**, and
8212S-**) the microphone and loudspeaker are farther away from you
than when you use a handset. Both the signal from the loudspeaker and
the signal to the microphone must be strengthened. When microphones
and loudspeakers are close together (such as in a speakerphone),
additional amplification typically generates a ringing sound (public
address systems do this if the volume is too high or the microphone is
too close to a loudspeaker).
Your speakerphone's sound-activated switches allow either the
microphone or the loudspeaker to be on at a given time. This means that
sounds travel in only one direction at a particular moment.
•
To manually place a call using your speakerphone,
1. Press the line button or the INTERCOM button.
2. Dial the number.
3. When party answers, speak toward the telephone.
•
To autodial using your speakerphone,
1. Press the programmed button and talk when your party
answers.
•
To answer a call with your speakerphone,
1. Press the line button with flashing red or orange light.
2. Speak toward the telephone to answer the call.
•
To answer an intercom call with your speakerphone,
1. Press the INTERCOM button and speak toward the telephone
after hearing two short rings,
—OR—
If your system is configured for voice-first calling, speak to-
ward the telephone to answer the call after hearing the caller's
voice.
•
To end a call with your speakerphone,
1. Press SPEAKER.
1 – 4 Non-LCD Station User's Guide
GCA70–248
Advertisement
Table of Contents
