Conferencing Calls; Conferencing Stations Together - Comdial R DSU User Manual

GCA70–248
6
6.1

Conferencing Stations Together

•
To conference any combination of inside stations and outside lines,
1. Make first call.
2. Press TRANSFER/CONFERENCE.
3. Make next call and press TRANSFER/CONFERENCE to
establish conference.
4. Repeat the last two steps to add up to two more parties.
NOTE: When setting up a conference call with outside lines and inside
stations, you must call the outside lines first. Use the line
group access codes to place the outside lines in your
conference.
•
To drop outside lines from the conference,
1. First press HOLD to place all calls on hold (not doing this will
result in a tone burst interrupting the remaining conferees).
2. Once all calls are on hold, press the line that you wish to bring
back to the conference.
3. Use steps two and three to bring back each line from hold.

Conferencing Calls

Non-LCD Station User's Guide 6 – 1
Conferencing Calls