Using The Imist Module - Comdial 8312S System Reference Manual

Using The Other Telephone Features

7.26 Using The IMIST Module

Impact SCS 8324F-**, 8324S-**, and 8312S-** speakerphones equipped
with the optional IMIST module can support an IST device (modem,
FAX machine, industry-standard telephone, etc.) in addition to the LCD
speakerphone. Depending on system programming, the IST device may
be used to make outgoing calls and receive incoming calls.
The functionality of the IMIST module depends on the type of system
you are using.
The IMIST module will function on a DXP system with the
•
appropriate digital station board, but the IMIST module will not
have its own extension number and will not function
simultaneously with the speakerphone.
On a DXP Plus system, the IMIST module will function
•
simultaneously with the speakerphone and have its own extension
number if your system has the appropriate digital station board and
memory board. If your system does not have the optional enhanced
memory board, the IMIST module will function like the one on the
DXP system described above.
On an FX Series system, the speakerphone and IMIST module can
•
function simultaneously and the IMIST module has its own
extension number.
NOTE: The IMIST module does not provide voltage to light a message
waiting light. Message waiting lights on devices plugged into
the IMIST module will not function.
If you have any other questions about IST devices, refer to GCA70–237,
Industry-Standard Telephone Station User's Guide.
NOTE: The IMIST module has a separate power supply. The wall
transformer is a UL and CSA approved Class 2 device
operating from 120 Vac, 60 Hz, 16 watts and provides an output
of 24 Vac at 450 mA. For replacement, order Comdial P/N
DIU-PTR.
7 – 30 LCD Speakerphone Reference Manual
Power
scs04
IMIST Module
GCA70–250
IST Device