Install The Log Set - Vermont Castings SDDVRBD, SDDVRC, SDDVRCCB Installation And Operating Manual

CAUTION: Before installation, inspect ember bed
burner for damage. Do not use ember bed if damaged
or cracked. NOTE: Small, shallow surface cracks are
acceptable.
Figure 51
Figure 52
Pin
20012950
Stardance Direct Vent - Rear Vent Gas Heaters

Install the Log Set

1. Remove the logs from their packaging and inspect
each piece for damage. DO NOT INSTALL DAM-
AGED LOGS.
2. Install the rear log by mating the notch on the bottom
of the log with the raised notch on the back left side
of the ember bed. (Fig. 51) Ensure the cutout in the
right side of the log is sitting around the pilot assem-
bly and pilot is not obstructed. (Fig. 52)
Rear Log
Pilot Assembly
Raised Notch
�����
���� ���
����
�����
����� ����� ���
����
Pilot Cutout
LG493
Raised Notch
LG497
29