CR 85-X D
IGITIZER
Reading an image plate
The main function of the CR 85-X is digitizing image plates and transmitting
the digital image data to the preview station and the image processing
station.
To read one or more image plates:
Make sure the cassette has been properly identified via the ID Station.
1
Refer to the User manual of the ID Software.
Check that the CR 85-X is ready for operation:
2
•
the CR 85-X must display the operator screen with 'Ready' or 'Busy' status.
VIPS not ready
CR 85-X
•
the status indicator at the top of the CR 85-X must be constant or flashing
green.
Place one or more cassettes in the input buffer.
3
38
Basic operation ('Operator mode')
Note: The CR 85-X is operational if the status field equals 'READY', even if
status messages of the destination are shown (e.g. 'VIPS not ready').
READY
Status field
4451C EN 2013-04-30