Cisco 8961 Administration Manual page 42

Cisco Unified IP Phone 9971
5 Navigation pad and Select button
6 Conference button
7 Hold button
8 Transfer button
9 Keypad
10 Speakerphone button
11 Mute button
12 Headset button
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
18
REVIEW DRAFT - CISCO CONFIDENTIAL
The four-way Navigation pad allows you to scroll through menus, highlight items, and
move within a text input field.
The Select button (center of the Navigation pad) allows you to select a highlighted item,
disable the phone screen for cleaning, or enable the phone screen if it is in power-save
mode.
The Select button is lit (white) when the phone is in Power Save or Power Save Plus mode.
Press the Select button to override Power Save and Power Save Plus mode.
Creates a conference call.
Places a connected call on hold and toggles between an active and held call.
Transfers a call.
Allows you to dial phone numbers, enter letters, and choose menu items by entering the
item number.
Selects the speakerphone as the default audio path and initiates a new call, picks up an
incoming call, or ends a call. During a call, the button is lit green.
The speakerphone audio path does not change until you select a new default audio path
(for example, by picking up the handset).
If external speakers are connected, the Speakerphone button selects them as the default
audio path.
Toggles the microphone on or off during a call. When the microphone is muted, the button
is lit red.
When muted, you can hear the other parties on the call, but they cannot hear you.
Selects the wired or wireless headset as the default audio path and initiates a new call, picks
up an incoming call, or ends a call. During a call, the button is lit green.
A headset icon
path. This audio path does not change until a new default audio path is selected (for example,
by picking up the handset).
in the phone screen header line indicates the headset is the default audio
Cisco Unified IP Phone