Adjust Brightness Setting; Adjust Auto Transmit Setting - Cisco 8961 Administration Manual

Cisco Unified Video Camera setup
Procedure
Step 1
On the Cisco Unified IP Phone, press Applications
Step 2 Select Accessories.
Step 3
Highlight Cisco Unified Camera.
Step 4 Press Setup.
Step 5 Select View Area.
Step 6 Use the arrows on the Navigation pad to increase or decrease the view area.
Step 7
Press Save.

Adjust Brightness Setting

The Brightness setting affects the video that you transmit to others. However, it does not affect the video that
you receive from other parties. You can adjust the Brightness setting to improve the quality of the video during
streaming.
Because the field of view can affect brightness, adjust the View Area feature for your camera before
Note
adjusting the Brightness setting.
To adjust the Brightness setting, follow these steps:
Procedure
Step 1
On the Cisco Unified IP Phone, press Applications
Step 2 Select Accessories.
Step 3 Highlight Cisco Unified Camera.
Step 4 Press Setup.
Step 5
Select Brightness.
Step 6 Use the arrows on the Navigation pad to increase or decrease brightness.
Step 7 Press Save.

Adjust Auto Transmit Setting

The Auto Transmit setting allows you to control the streaming of videos for both inbound and outbound calls.
When Auto Transmit is on (default setting), the camera streams video automatically during calls. When Auto
Transmit is off, video for each call is automatically muted (however, your phone still receives video). To
REVIEW DRAFT - CISCO CONFIDENTIAL
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Adjust Brightness Setting
.
.
(SIP)
81