Cisco 8961 Administration Manual page 171

Features, Templates, Services, and User Setup
Feature
Headset Sidetone Controls
Hide Softkeys in Full Screen
Video Mode
Hide Video Option
Hide Wi-Fi User Interface
Setting
Hold Reversion
Hold Status
REVIEW DRAFT - CISCO CONFIDENTIAL
Description
Allows you to adjust headset levels to one of five
following settings:
• Off
• Very Low
• Low
• Normal
• boost
Note This feature is only for analog
headsets.
Controls the way that softkeys display in full screen
video mode.
Provides flexibility with the flexibility to hide the video
window. When the video is displayed, the user sees the
Hide Video softkey; when the video is hidden, the user
sees the Show Video softkey.
The phone supports a new configuration parameter that
enables the administrator to control whether the video
is displayed or hidden. The parameter is Hide Video
By Default, with values Disabled (default) or Enabled.
Removes the Wireless Setup option from the Network
Setup menu when WiFi is disabled from the Cisco
Unified Communications Manager.
This feature is supported only on the Cisco Unified IP
Phone 9971.
Limits the amount of time that a call can be on hold
before it reverts back to the phone that put the call on
hold and alerts the user.
Reverting calls are distinguished from incoming calls
by a single ring (or beep, depending on the new call
indicator setting for the line). This notification repeats
at intervals if the call is not resumed.
A call that triggers Hold Reversion also displays an
animated icon in the call bubble and a brief message on
the status line.
You can configure call focus priority to favor incoming
or reverting calls.
Enables phones with a shared line to distinguish
between the local and remote lines that placed a call on
hold.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Telephony features available for Cisco Unified IP Phone
Configuration Reference
For more information, see the following:
• Cisco Unified Communications
Manager System Guide, "Cisco
Unified IP Phone" chapter.
• Cisco Unified Communications
Manager Administration Guide,
"Setting Headset Sidetone Controls"
section
No configuration required
For more information, see Cisco Unified
Communications Manager System Guide,
"Cisco Unified IP Phones" chapter.
For more information, see the "Cisco
Unified IP Phone Configuration" chapter
in the Cisco Unified Communications
Manager Administration Guide.
For more information about configuring
this feature, see "Hold Reversion" chapter
in the Cisco Unified Communications
Manager Features and Services Guide.
No configuration required.
(SIP)
147