Cisco 8961 Administration Manual page 218

Set Headset Sidetone Controls
Field
Provide Dial Tone from Release Key
Set Headset Sidetone Controls
Procedure
Step 1 Go to Cisco Unified CM Administration and choose Device > Phone.
Step 2
Find your phone from the list of phones associated with the Cisco Unified CM.
Step 3 Click on the Device Name of the phone.
The Phone Configuration window appears.
Step 4
Go to Product Specific Configuration Layout area and from the Wideband Headset UI Control drop-down
list box, choose the applicable profile.
Step 5 The Off option is selected by default (should be enabled only if the user headset supports wideband).
Step 6 Parameters that you set in the Product Specific Configuration area may also appear in the Device Configuration
window for various devices and in the Enterprise Phone Configuration window.
If you set these same parameters in these other windows as well, the setting that takes precedence is determined
in the following order:
1 Device Configuration window settings
2 Common Phone Profile window settings
3 Enterprise Phone Configuration window settings
Park Monitoring
Park monitoring is supported only when a Cisco Unified IP Phone 8961, 9951, or 9971 parks a call. Park
monitoring then monitors the status of a parked call. The park monitoring call bubble is not cleared until the
parked call gets retrieved or is abandoned by the parkee. This parked call can be retrieved by using the same
call bubble on the parker's phone.
Park Monitoring Service Parameters
Cisco Unified Communications Manager Administration provides three clusterwide service timer parameters
for park monitoring: Park Monitoring Reversion Timer, Park Monitoring Periodic Reversion Timer, and Park
Monitoring Forward No Retrieve Timer. Each service parameter includes a default and requires no special
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
194
REVIEW DRAFT - CISCO CONFIDENTIAL
Features, Templates, Services, and User Setup
Description
Identifies if pressing the Release key causes the user
to hear dial tone (Enabled) or not (Disabled).
The possible values are Disabled or Enabled.
The default is Disabled