Table of Contents
Advertisement
Service Manual
Removal:
1. Remove the free-arm extension table, all the covers, the stitch length and buttonhole
control assembly (see pages 66-67) and the handweel.
2. Remove screw nut ( I ) and the eccentric screw (H).
3. Position the top of the eccentric gear (C) at the back of the machine.
4. Turn shaft (E) counterclockwise until "U" channel in stitch regulator (B) is in the
vertical position and keep it in that position.
5. Remove fork (A) by pulling it down and out the machine.
Replacement:
1. Replace these parts the same way as described above, but in a reverse order.
2. Adjust feed dog throw (see pages 124-125).
Rev. n .
o
AGO/03
Feed Forked Connection
60
359109-000 AGO/03
Hide quick links:
Advertisement
Table of Contents
