Singer 2700 Series Service Manual page 21

Service Manual
Face Plate and Lamp Mounting Bracket
Removal:
Remove the face plate and the arm top cover.
1.
2. Remove the screw (A),the washer and the needle threader lever guide (for models
2730/2732).
3. Loose the screw (B) and remove the socket with the lamp.
4. Remove the spring (D) (for models 2730/2732).
5. Remove the screws (C), and the face plate and lamp mounting bracket (E).
Replacement:
Replacement of the face plate and lamp mounting bracket is in the same way as
1.
described above, but in a reverse order.
Note:
Adjust the needle threader lever guide.
Rev. n .
o
AGO/03
20
359109-000 AGO/03