Singer 2700 Series Service Manual page 41

Service Manual
Disc Follower Quick Out Lever
for Models 2718 / 2724 / 2730
Removal:
1. Remove the free-arm extension table, all the covers and the stitch width bracket
assembly.
2. Remove screw (A) and eccentric bushing (B).
3. Remove lever (D) and spring (C).
Replacement:
1. Replace these parts the same way as described above, but in a reverse order.
Disc Follower
Removal:
1. Remove the free-arm extension table and all the covers.
2. Move the stitch width lever to the left (straight stitch).
3. Remove retaining ring (A) and spring (B).
4. Pull the follower (C) up to remove it.
Replacement:
1. Replace these parts the same way as described above, but in a reverse order.
Rev. n .
359109-000 AGO/03
o
40
AGO/03