Singer 2700 Series Service Manual page 37

Service Manual
Disc Stack Shaft Gear and Bracket Assembly
Removal:
1. Remove the free-arm extension table and all the covers.
2. Loose the screw (A).
3. Remove bracket (B) and the gear by pulling them up.
Replacement:
1. Replace these parts the same way as described above, but in a reverse order.
Disc Stack Shaft Gear and Bracket Assembly
Removal:
1. Remove the free-arm extension table and all the covers.
2. Loose the 3 screws (A).
3. Remove bracket (B) and the gear by pulling them up.
Replacement:
1. Replace these parts the same way as described above, but in a reverse order.
Rev. n .
o
AGO/03
for Models 2712 / 2722 / 2732
for Models 2718 / 2724 / 2730
36
359109-000 AGO/03