Service Manual
Needle Bar Vibrating Bracket Assembly
Removal:
1. Remove the face plate, arm top cover and the needle bar.
2. Loose the screw (A).
3. Remove the screw (B) and the collar (C).
4. Loose the screw (D) and remove the stud (E).
5. Remove the vibrating bracket (F).
Replacement:
1.
Replace these parts the same way as described above, but in a reverse order.
2. Adjust the needle location in the needle plate slot and needle to hook relationship
(if necessary).
(See pages 94-95 and 96-97).
3. Adjust the hook and needle synchronism (hook timing) and needle bar height.
(See pages 110-111 and 84-85).
Rev. n .
o
AGO/03
24
359109-000 AGO/03