Singer 2700 Series Service Manual page 33

Service Manual
Cam Controlled Feed Follower
Removal:
1. Remove the free-arm extension plate and all the covers.
2. Remove the retaining ring (A).
3. Remove the cam controlled feed follower assembly (B).
Replacement:
1. Replace these parts the same way as described above, but in a reverse order.
Removal:
1. Remove the free-arm extension plate, all the covers and the cam controlled feed
follower assembly.
2. Remove the retaining ring (A).
3. Remove screw (B).
4. Remove the needle position lever (C).
Replacement:
1. Replace these parts the same way as described above, but in a reverse order.
Removal:
1. Remove the free-arm extension plate and all the covers.
2. Remove screw (A).
3. Remove the needle position lever (B).
Replacement:
1. Replace these parts the same way as described above, but in a reverse order.
Rev. n .
o
AGO/03
Needle Position Lever
(for Models 2718 / 2724 / 2730)
Needle Position Lever
(for Models 2712 / 2722 / 2732)
32
359109-000 AGO/03