Service Manual
Removal:
1. Remove the face plate, arm top cover, needle bar, face plate and lamp mounting
bracket, needle threader and needle bar vibrating bracket.
2. Raise press bar, remove the screw (A) and the presser foot shank with presser foot (B).
3. Loose the screw (D) and remove the bracket (E).
4. Remove the retaining ring (C).
5. Loose the screw (F) and remove the presser bar bushing (G) and the presser bar (H).
Replacement:
1.
Replace these parts the same way as described above, but in a reverse order.
2. Adjust the presser bar height and alignment.
Rev. n .
o
AGO/03
Presser Bar Assembly
26
359109-000 AGO/03