4-Way Conferencing - Uniden EXI2926 Owner's Manual

4-Way Conferencing

A four th person, at either the handset or the base, may be added to
conference call.
For example, to add a four th par ty at the handset to an ongoing conference
call at the base:
1) Press hold. The line 1 and line 2 LEDs turn red.
2) Press intercom on the base to contact the handset.
3) Press Lup/int'com on the handset. Speak to answer the page.
4) Press conference at the base or dnM/conf at the handset to bring the par ty at the
handset in on the call.
The line 1 and line 2 LEDs are green.
The following screen appears:
5) To remove either caller from your conversation, ask one of the par ties to hang up.
Press the corresponding line button to end the call.
tip
• When a call is on
hold at the
handset, and the
base is paged, the
base will ring
even when the
RING VOL switch
is set to OFF.
• The person at the
handset can join
the conversation
by pressing the
line number
currently in use.
2 - L I N E F E A T U R E S [ 19 ]