Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone's
channel for clear operation. This function works only when the phone is in use.
Press select/ch. "
another channel. For more information on interference, refer to "Radio Interference" on page 64.
Find Handset
To locate the handset, press find hs/transfer on the base.
The handset beeps for 60 seconds, and "
the display.
Paging is canceled when pressing any key on the handset or
find hs/transfer on the base. Additionally, if you receive an
incoming call, page is canceled.
3-Way Conferencing
The Uniden TRU448 series permits 3-way conversations between the
handset, base, and an outside line.
When speaking on the handset
1) Press
(talk) on the base to initiate the 3-way conversation.
2) To hang up, press
be connected to the call.
When speaking on the base
1) Press talk/flash on the handset to initiate the 3-way conversation.
2) To hang up, return the handset to the base, or press end on the
handset. The base will still be connected to the call.
" appears on the display, indicating the phone is changing to
" appears on
(talk) on the base. The handset will still
• If the handset
battery is
completely drained,
the handset will not
beep when paging.
• If you press
xfer/del on the
handset during the
3-way conversation,
you will hear a beep.
• During the 3-way
conversation, all
the base keys
except
(talk)
and volume
are disabled.
B A S I C S
[ 25 ]