Tone Dialing Switch-Over; Traveling Out-Of-Range; Selecting A Different Channel; Using The Page Feature - Uniden EXI2926 Owner's Manual

Tone Dialing Switch-over

Some telephone companies use equipment that require pulse dialing (sometimes referred to
as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone
dialing during the call. An example of this could be entering your bank account number after
you have called your bank. The digits of your bank account can be entered using DTMF tones.
Initially make your call with the pulse dialing mode. Once your call connects, press
number (like in example above the bank account number). These digits will be sent as tone dialing. This special
number can be stored in a memor y location. This is referred to as Chain Dialing (See page 22). Once the call
ends, the tone mode is canceled and pulse dialing mode resumes.

Traveling Out-of-Range

During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the
range limits of the base unit, your call will terminate within 30 seconds.

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change the
channel for clearer operation. Interference can come from appliances or other phones
in your home. This function works only when the phone is use.The chan on th handset
allows you to choose between 40 dif ferent channels.
During the course of a conversation, if you hear static or noise which makes it difficult to
hear, press chan. The following screen appears and the phone changes to a different
channel. For more information on interference, refer to "Technical Information" on page 32.

Using the Page Feature

To locate the handset when it is of f the base, press intercom on the
base. The handset beeps for 60 seconds.
The following screen appears:
Press Lup/int'com on the handset to connect to the base.
Press Lup/int'com on the handset or intercom on the base again to return to standby.
/ /tone. Enter the desired
* t
note
The tone feature
only applies when
the dial mode is set
to pulse.
B A S I C S [ 15 ]