4-Way Conferencing - Uniden DCT5280 Owner's Manual

4-Way Conferencing

[ 66 ] E X PA N D I N G Y O U R P H O N E
DirectLink call
1) When the phone is in the DirectLink standby mode,
press the DirectLink soft key. (Example of DirectLink
from handset #1).
2) Select the party by pressing the number keys (1-4).
Your handset will page the other handset.
3) On the receiving handset, press talk or the ANSWER
soft key, or any number key,
(when Anykey Answer is On).
4) When you finish your conversation, press the end key or the END soft key on
either handset.
Return the handset to the cradle, or press the CANCEL soft key then the OK soft key
to return to normal mode.
Fourth person, at either the handset or the base, may be added to the conference call.
For example, to add a fourth party to an ongoing conference call at the base or another
handset, press talk/flash on the fourth party's handset (or
remove either caller from your conversation, press the end key on the party's handset
(or (talk) on the base). The other parties will still be connected to the call.
/tone/ , or #
t / s
(talk) on the base). To