Redialing A Call - Uniden DCT5280 Owner's Manual

Redialing a Call

The last three phone numbers dialed can be quickly redialed.
Redialing from Standby Mode
1) Press the CID RDL PB soft key in the standby mode.
L
2) Press volume/ or
then press the OK soft key. The phone number that
was last dialed appears in the display.
L
3) Press volume/ or
three phone numbers dialed.
4) Press talk/flash or speaker.
The selected number is dialed.
5) To hang up, press the end key.
Redialing from Talk Mode
1) Press talk/flash or speaker, then the MENU soft key.
2) Select the number you dialed by following steps 2-3 in "Redialing from Standby
Mode". To go back, press the BACK soft key.
3) Press the DIAL soft key.
4) To hang up, press the end key.
Deleting a Redial Record
1) In the standby mode, recall the desired number by
following steps 1-3 in "Redialing from Standby Mode".
2) Press the DELETE soft key.
L
3) Press volume/ or
4) Press the OK soft key. The redialed number is deleted.
M
to select "
M
to toggle through the last
M
to choose " ".
",
or
or
• If the number
exceeds 32 digits,
only the first 32
digits are retained
in redial memory.
• If the redial memory
is empty, you will
hear a beep.
• If you have not
pressed any key for
30 seconds, the
phone returns to the
standby mode.
• If you press the end
key, the operation
is canceled.
B A S I C S [ 33 ]