Placing A Call On Hold - Uniden DCT5280 Owner's Manual

Placing a Call on Hold

[ 32 ] B A S I C S
From the Base (Receiving calls only)
1) Press (talk) and begin speaking.
To hang up, press (talk).
2)
The base microphone is located under the base
(see "Controls and Functions" on page 7).
Position yourself as near to the base as possible.
1) During a call, press intercom/hold. The call will be
put on hold.
Once 10 seconds has passed or when you press the end key,
the call will be put on hold.
2) To talk to the caller, press talk/flash or speaker on a
handset. The phone will return back to the call.
• You can hold a call for 5 minutes, when 5 minutes has
passed, the call is disconnected and the phone returns to
the standby mode.
• While a call is on hold, CIDCW can not be received.