Setting Up The Menu - Uniden DCT5280 Owner's Manual

Setting up the Menu

Entering the Menu
1) Press the MENU soft key in the standby mode.
L
2) Press volume/ or
desired main menu (DirectLink Mode, Handset Setup,
Answ. Setup, Global Setup, and System Reset).
3) Press the OK soft key to enter the menu. To return to
the previous screen, press the BACK soft key.
L
4) Use volume/ or
then press the OK soft key to enter.
In the submenu, volume/
item. Press the OK soft key to confirm your setting. To return to the previous screen,
press the BACK soft key. For detailed instructions, see the following sections for the
desired submenu.
5) To exit the menu, press the end key.
• If any of the following occurs during the menu operation, the operation will be cancelled.
- Press the end key.
- Press talk/flash or speaker.
- Charge the handset.
- Receive an outside/intercom call.
• If the handset remains idle for 30 seconds, the phone will return to the standby mode.
M
to move the pointer to a
M
to select a desired submenu,
L M
or is used to select an
For Answering Setup
menu, you can also
set them from the
base (see page 53).
G E T T I N G S T A R T E D [ 23 ]