Deleting An Outgoing Message; Setting The Base Ringer Volume - Uniden DCT5280 Owner's Manual

• If an outside call is
received during the
operation, the
operation is canceled.
• If you press
L
ringer/vol in the
maximum volume level
M
(3) or ringer/vol
in the ringer off (0),
you will hear a beep.
[ 52 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E
Choosing between the two outgoing messages
When the phone is in the standby mode, press greeting. Press greeting again when the
outgoing message is played. Each time greeting is pressed, the outgoing message is
switched between the pre-recorded and the personal outgoing message.

Deleting an outgoing message

To delete the personal outgoing message, press
The system announces "Greeting has been deleted".

Setting the base ringer volume

You have four ringer volume options. One allows you to turn the base ringer off. The
other three are volume levels.
1) When the phone is in the standby mode, press ringer/vol
at the current volume level (" " High, " " Medium, " " Low, or " " Off) (if you set
the base ringer volume to off "Ringer Off" is announced), and it appears on the base.
L
2) Press ringer/vol or
hear a ringer at the selected volume level. The system returns to the standby mode.
You can also set the base ringer volume or while the phone is ringing, press ringer/vol
M
or repeatedly to select the desired ringer volume.
M
repeatedly until the desired ringer volume appears. You will
del while the message is playing.
L M
or . You hear the ringer
L