Basics; Making And Receiving Calls - Uniden DCT5280 Owner's Manual

Dct5280 series 2.4 ghz multi handset cordless system
Table of Contents

Advertisement

Making and Receiving Calls

From the handset
On the handset, you may also use the speakerphone while talking to an outside call.
Using the handset speakerphone is called "hands-free conversation". This feature allows
you to easily communicate while performing other tasks, such as cooking.
during hands-free conversations.
You can easily switch a call from normal conversation to "hands-free conversation".
To switch a call, press the speaker key during the call.
To answer a call
To make a call
To hang up
To enter a pause within When you dial the number in the standby mode, press the PAUSE soft key.
the dialing sequence
Normal conversation
Handset On the Cradle
Pick up the handset (AutoTalk) or pick up
the handset and press talk/flash.
Handset Off the Cradle
Press any number key, /tone/
t
(Any Key Answer), or press talk/flash.
Handset Off the
Cradle
1) Press talk/flash.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, then
press talk/flash.
Press the end key, or return the handset to the cradle (AutoStandby).
" " appears in the display, which represents a pause.
Hands-free conversation
Handset Off the Cradle
,or #/
Press speaker.
s
Handset Off the
1) Press speaker.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, then
press speaker.
• To set "Autotalk", see
appears
page 25 or "Anykey
Answer", see page 26.
• The handset
microphone is located
at the bottom of the
handset (see "Controls
and Functions" on
page 6). Position
yourself as near to the
handset as possible
and speak clearly.
• If the line is in use by
another handset(s),
"
appears in all
registered handset's
Cradle
display, that are not
in use.
B A S I C S
"
[ 31 ]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dct5280-2

Table of Contents